AER COMPACT 60
AER COMPACT 60 SLOPE/WEDGE
AER COMPACT MOBILE AMP
Based on the Compact 60, thus identical in sound, but with adapted technology and slightly changed dimensions, you can play up to 4 hours without the mains. Whether you choose to play in the main street or on the beach, the sound is always clear and omnipresent.
In case of insufficient battery power the intelligent power control gives a warning and saves you from lack of power during performance. Moreover it prevents the batteries from being completely exhausted.
Technical specifications Compact Mobile2 – page 1 www.aer-amps.com CompactMobile2 - 2012_07_GB Technical data Inputs High impedance, unbalanced instrument or line input Mono jack socket, ¼“ (6.35 mm) Min. input voltage: 22 mV (–33 dBV) Max. input voltage: 5 V (+14 dBV) Input impedance: 2.2 M || 350 pF Equivalent input noise voltage (A-weighted): 1.5 μV (– 117 dBV) High/low (attenuator) switch: –10 dB Phantom power: Optional (see notes), 9 V DC / max. 100 mA, on ring of input jack, short circuit protected channel 1 clip indicator Headroom: min. 6 dB Switchable line / microphone input Combo socket, XLR + jack ¼” (6.35 mm) line mode (via jack input only) High impedance, unbalanced instrument or line input Min. input voltage: 27 mV (–31 dBV) Max. input voltage: 7 V (+17 dBV) Input impedance: 2.2 M || 350 pF Equivalent input noise voltage (A-weighted): 2.4 μV (– 113 dBV) mic mode Microphone input, XLR (balanced), stereo jack (balanced), or mono jack (unbalanced) 1 / sleeve = ground, 2 / tip = positive (+), 3 / ring = negative (–) Min. input voltage: 3.3 mV (–50 dBV) with low-gain option: 5.8 mV (–45 dBV) Max. input voltage: 1 V (0 dBV) with low-gain option: 1.8 V (+5 dBV) (see notes) Input impedance (balanced): 1.2 k Input impedance (unbalanced): 2.7 k Voice filter: –10 dB at 270 Hz referred to 10 kHz Equivalent input noise voltage (A-weighted): 0.9 μV (–121 dBV) Phantom power: XLR only, 48 V, switchable, R = 6.8 k per terminal, max. 10 mA total, short-circuit protected channel 2 clip indicator Headroom: min. 6 dB aux in Auxiliary stereo input, e.g. for CD player Cinch (RCA) sockets, L / R Level adjustable by aux level Min. input voltage: 100 mV (–20 dBV) Max. input voltage: 3.5 V (+11 dBV) Input impedance: 22 k return Input from external parallel effect loop, or supplementary input Mono jack, ¼” (6.35 mm) Min. input voltage: 320 mV (–10 dBV) Max. input voltage: 5 V (+14 dBV) Input impedance: 20 k (but 5 k while external effect is switched OFF by footswitch) Outputs line out Line output after master, with aux in and effects Mono jack, ¼” (6.35 mm) Output voltage: 700 mV (–3 dBV) Output impedance: 100 Min. load impedance: 2 k Residual noise (A-weighted): 4.5 μV (–107 dBV) headphones Headphones output Stereo jack socket, ¼” (6.35 mm), L/R connected When plugged in, internal speaker is muted. Output power at rated conditions: 2 x 8 mW / 32 Max. output power: 2 x 100 mW / 1000 Output impedance: 470 (common for L/R) Min. load impedance: not limited Note: Suitable for stereo headphones with stereo jack only. Not functional with mono jacks. send Output for external parallel effect loop, before master, after tone controls Mono jack, ¼” (6.35 mm) Output voltage (efx pan fully clockwise): 900 mV (–1 dBV) Output impedance: 47 Min. load impedance: 2 k tuner Tuner output, after tone controls, before effects and master Mono jack, ¼” (6.35 mm) Output voltage: 225 mV (–13 dBV) Output impedance: 47 Min. load impedance: 2 k DI-out Balanced, non-isolated XLR output, after tone controls, without aux in and effects 1 = ground, 2 = positive (+), 3 = negative (–) Output voltage (differential): 93 mV (–21 dBV) Output impedance: 47 , each terminal to ground Min. load impedance (differential): 1 k Footswitch connector footswitch Connector for a dual footwitch Stereo jack, ¼” (6.35 mm) Tip = internal effect on/off Ring = external effect on/off Sleeve = common (ground) Function: Switch ON = effect OFF Tone controls colour –3 dB at 700 Hz +10 dB at 8 kHz bass 8 dB at 100 Hz (shelf type) middle 6 dB at 800 Hz Channel 1 treble 8 dB at 10 kHz (shelf type) Channel 2 bass 8 dB at 100 Hz (shelf type) treble 11 dB at 10 kHz (shelf type) Effects Digital effect processor 1 Reverb (short predelay) 2 Reverb (long predelay) 3 Delay (320ms, repetitive) Internal effects 4 Chorus External effects Parallel effect loop, see send and return efx pan Blends both internal and external effects between channels 1 and 2, with reverse direction of rotation for the external effecView full product details